 |
7728054
Lyman Loading Block
Organize your cases for safe reloading Essential accessory for organization and speed, twin loading block holds 50 rifle or pistol cases .22 through .45 caliber. Molded of heavy duty plastic. |
 |
7728053
Primer Tray
Essential for handling & orienting primers Flips primers anvil-side-up for easier loading. Simply spread on specially grooved surface, replace lid and shake. Made of durable plastic for safety. |
 |
7752431
E-Zee™ Powder Funnel
A powder funnel designed for the widest range of cartridges Redesigned with all of the latest cartridges in mind, the specially designed powder nozzle of this new funnel handles everything from the smallest .22 up to the big .50 calibers. Including the new Super Short Magnums. |
 |
7631296
Qwik Spray™ Case Lube
The fast, easy way to lube cases This new petroleum based lube in a can allows you to spray an entire loading block of cases in seconds. Super slick lube helps prevent case dents and takes away the mess. |
 |
7631360
Case Neck Dipper
-- Extend case & die life with proper lubrication
Prolong case and die life and make resizing easier by cleaning and lubricating the interior of bottleneck cases. After cleaning with brushes, dip the case mouths into dry lube to reduce friction from sizing die expander button. Includes 3 brushes and dry mica for cleaning all cases from .17 to .45 caliber. Mica refill available. |
 |
7810199 7810206 (XL) Deburring Tool -- from 17 to 45 caliber Bevels and removes burrs from both inside and outside of case mouth. Precision machined and hardened. Extra Large Deburring Tool -- from 17 to 60 caliber Ideal for black powder cartridge shooters. A must for 50 BMG reloading. The 30 degree angle cutter bevels inside the mouth of the case allowing the bullets to slide in without deforming. |
 |
Inertial Bullet Puller. Safely strips loaded rounds in seconds without damage to bullet or case. Traps components with just a few raps on the bench. Three jaw chuck fits all cartridges from .22 to .45. Made of tough polycarbonate over aluminum handle.
| Item ID | Size/Style | Description | MSRP | Sale | >$250 Effective Price* |
| |
|---|---|---|---|---|---|---|---|
| 7728054 | .22 to .45 Cal | Loading Block | 7.00 | 5.60 | 5.04 | ||
| 7728053 | Primer Tray | 4.95 | 3.96 | 3.56 | |||
| 7752431 | E-Zee Powder Funnel | 5.25 | 4.20 | 3.78 | |||
| 7752433 | Powder Pal Electronic Scale Funnel Pan | 6.95 | 5.56 | 5.00 | |||
| 7810216 | Magnum Inertial Bullet Puller | 22.98 | 18.38 | 16.55 | |||
| 7631296 | Aerosol | Quick Spray Case Lube | 8.75 | 7.00 | 6.30 | ||
| 7631298 | 16 oz. Spray | "Quick Slick" Pump Spray Case Lube (NEW) | 19.95 | 15.96 | 14.36 | ||
| 7631360 | .17 to .45 Cal | Case Neck Dipper | 11.50 | 9.20 | 8.28 | ||
| 7991415 | 1 oz. | Mica Refill | 4.95 | 3.96 | 3.56 | ||
| 7810199 | .17 to .45 Cal | Deburring Tool | 19.95 | 15.96 | 14.36 | ||
| 7810206 | .17 to .60 Cal | Extra Large Deburring Tool | 27.50 | 22.00 | 19.80 |
 |
Bench Wrench
Lyman's Bench Wrench fits all current Lyman die lock nuts and Lyman T-Mag turret support post. The wrench fits Lyman decapping rod, seating screw and expander plug hex nuts. Also new style Lyman & RCBS 7/8 x14" nuts.| Item ID | Size/Style | Description | MSRP | Sale | >$250 Effective Price* |
| |
|---|---|---|---|---|---|---|---|
| 7990116 | Die Bench Wrench | 5.00 | 4.00 | 3.60 |
Press Accessories
 |
| Primer Catcher |
 |
| Auto-Primer Feed |
Auto-Primer Feed. Eliminates handling of primers with oily fingers, speeds loading. Supplied with two tubes (large and small). Fits T-Mag II and Crusher II.
 |
| Priming Arm |
 |
| Bench Wrench |
Priming Arm. Seats all sizes and types of primers. No extras to buy. Supplied with two priming sleeves (large and small).
Bench Wrench. Fits all current Lyman die lock nuts, T-Mag turret support post, decapping rod, seating screw, and expander plug hex nuts. Also new style Lyman & RCBS 7/8 x14" nuts.
| Item ID | Size/Style | Description | MSRP | Sale | >$250 Effective Price* |
| |
|---|---|---|---|---|---|---|---|
| Press Accessories | |||||||
| 7726420 | T-Mag/Crusher | Primer Catcher | 8.25 | 6.60 | 5.94 | ||
| 7729050 | T-Mag/Crusher | Auto-Primer Feed | 29.95 | 23.96 | 21.56 | ||
| 7412053 | Large | Auto-Primer Feed Tube | 7.25 | 5.80 | 5.22 | ||
| 7412052 | Small | Auto-Primer Feed Tube | 7.25 | 5.80 | 5.22 | ||
| 7728036 | T-Mag/Crusher | Priming Arm | 16.95 | 13.56 | 12.20 | ||
| 7392036 | Adapter 7/8 x 14 (inside threaded to accept 310 dies and the Model 55 powder measure) | 8.25 | 6.60 | 5.94 | |||
| 7990116 | Die Bench Wrench | 5.00 | 4.00 | 3.60 | |||
