|HOME||INDEX||Official Targets||Eye, Ear, & Hand Protection||Speed Loaders||Gun Care||Lyman Reloading||Shopping CART|
|A-Zoom SnapCaps||BoreStores Soft Cases||Gun Guides||Gun Mats||Lasers Boresights||Mace 90% Off||Grips/Sleeves Pads/Extenders|
|Range Bags Duty Gear||Spotting Scopes||TacStar Tactical||Target Stands||Trius Traps||Tools & More...||Holsters, Belts, Pouches|
|LYMAN||Presses & Kits||Die Sets||Shell Holders||Case Trimmers||Case Prep Tools||Case Measures||Publications||Powder Scales||Powder Measures||Turbo Ultra‑Sonic||Turbo Tumblers||Tumbler Media||Bullet Casting||Accessories||Super Moly||Gun Cleaning|
Universal Case Prep Accessory Tool Set
All your case prep tools in one place
This new accessory features all the items necessary for quality case preparation in one deluxe set. , outside deburring tool, inside (VLD) chamfer tool. All individual items have their own molded handle with rubber insert for sure grip. Includes custom zippered case for storage or easy transport to the range. (Save 40% over individual purchases).
Lyman Stuck Case Remover Kit
The Lyman Stuck Case Remover Kit will safely and easily remove stuck cases from sizing dies. Unlike other kits, all the tools that are needed are included. The kit includes a unique dual purpose threaded cap that screws over the end of the die. This cap acts as both a drill guide and a guide for the pulling screw. An extra-long hex wrench is included which provides plenty of leverage when removing stuck cases and also doubles as a handle for the tap wrench.
7810206 (XL) Deburring Tool -- from 17 to 45 caliber: Bevels and removes burrs from both inside and outside of case mouth. Precision machined and hardened.
Extra Large Deburring Tool -- from 17 to 60 caliber: Ideal for black powder cartridge shooters. A must for 50 BMG reloading. The 30 degree angle cutter bevels inside the mouth of the case allowing the bullets to slide in without deforming.
24.95 ea. (17-45)
37.50 ea. (17-60)
7777800 (17-45 cal)
7777811 (50 BMG) Case Prep Multi-Tool -- One compact, double-ended storage tool (.17-.45 cal and .50 BMG versions)
Lyman's Unique New Case Prep Multi-Tool provides the reloader with all the essential Case Prep Accessories in one compact, double-ended storage tool. Unique handle unthreads in the middle to store all parts. Both ends of the handle are threaded to allow two heads to be mounted simultaneously. Includes:
33.75 ea. (17-45)
73.25 ea. (50 BMG)
Outside Chamfer Tool
Removes excess brass from trimmed cases
Lyman's Outside Chamfer Tool easily deburrs the outside case mouth to leave a smooth even finish. Works on cartridges from 17 cal to 45 cal. Compliments the VLD (Very Low Drag) Inside Chamfer Tool.
VLD (Very Low Drag) Chamfer/Reamer
Improved bullet seating
Lyman's VLD Chamfer/ Reamer eliminates damage to bullets caused by the sharp edges of the cartridge case neck. The long boat tail on VLD bullets are cut by the case mouth when chamfered with a standard 45 degree reamer. The sharp 22 degrees on the VLD reamer allows all bullets to slip easily into the case ensuring the best accuracy. Recommended for Sierra VLD and Other Mfg's VLD Bullets.
7777792 (with handle)
7777794 (head only) Carbide VLD (Very Low Drag) Chamfer/Reamer - Works great for any long boat tail bullet design
For many years, the Lyman VLD Chamfer/ Reamer has been extremely popular with reloaders due to its gentle 22 degree cutting angle. It cuts much easier than standard 45 degree angle reamers and works great for any long boat tail (very low drag) bullet designs. Now this popular tool is available in long lasting, super sharp carbide. The precision ground carbide tool will last a lifetime without showing any signs of wear, perfect for the high volume reloader.
48.95 ea. (with handle)
44.50 ea. (head only
7777785 (Lg) Primer Pocket Reamer
Essential for reloading military cases
12.50 ea. (Sm)
12.50 ea. (Lg)
7777791 (Sm) Primer Pocket Cleaner
Clean primer pockets promote uniform primer seating
Cleans fouling from primer pocket bottoms. Molded handle included. Available in large or small sizes.
12.50 ea. (Lg)
12.50 ea. (Sm)
7810215 (Large Rifle)
7810218 (Small Rifle)
7810219 (Large Pistol) Primer Pocket Uniformer
Assures uniform primer depth for best accuracy
This precision tool is designed to cut primer pockets to a uniform depth that can produce more
26.95 ea. (Large Rifle)
26.95 ea. (Small Rifle)
26.95 ea. (Large Pistol)
Flash Hole Cleaner
Clears flash holes following cleaning. Designed to remove bits of media from flash holes and primer pockets.
Flash Hole Uniformer
Remove flash hole burrs for best accuracy
This handy tool removes internal flash hole burrs. Features a tool steel cutter which is inserted into the flash hole through the case neck. Adjustable stop collar allows use with any size case. Burrs are removed with a clockwise turn. Fits .22 to .45 Calibers.
7631302 (Pad) Case Lube Kit
Everything needed to clean & lube cases
Everything the reloader needs to clean and lube cases, inside and out, in one package. Large cloth lubricating pad in plastic case dispenses lube evenly. Includes 2 oz. of Lyman Case Lube, 3 interchangeable neck brushes and wooden handle. Extra Lube and replacement Pads available.
25.75 ea. (Kit)
127.50 ea. (Lube)
1210.95 ea. (Pad)
Case Prep Xpress
-- All accessories available simultaneously
The Case Prep Xpress is the only "All-Inclusive" System offering all the most popular case prep accessories driven by a high torque gear motor. The dump pan provides easy clean up of brass shavings. The best part is that all accessories are included from the start, no need to have to separately purchase expensive additional accessories. Includes:
Power Deburring Tool Kit
Makes case prep fast and easy!
Now reloaders can perform all the important case prep functions faster and more efficiently than ever before with Lyman's all new Power Deburring Kit. High torque rechargeable power driver turns at the perfect speed for performing inside and outside deburring operations in seconds. Set includes all the essential case prep accessories, including large and small primer pocket reamers and cleaners, case neck brushes, and inside/outside deburring tools. With the hex adapters (included), accessories simply pop in and out of the driver, (no threading or chucking required). Set also includes standard and Phillips driver bits. Take the drudgery out of your case preparation with this one amazing set.
Adr: 12 Schiber CT, Maryville, IL 62062
|Shooting Targets are fun for the whole family!||© 1998-2020 Pistoleer.com, LLC. All rights reserved.||Date you hit this page: Thursday August 05 2021|